American no longer seek for big house

                              American no longer seek for big house

    New survey shown that more than half of Americans would consider living in a home that’s less than 600 square feet. And among millennials, interest increases to 63%.

 

But”big is better” right? The American demand for living small is getting bigger.recent survey shown More than half of Americans would consider living in a home that’s less than 600 square feet. And among millennials, interest increases to 63%. why they like choose to live in a small space?let’ read on.

There are many merits to the tiny home, and people chose it for any number of reasons,such as environmental concerns, financial concerns and the desire for more time and freedom. The most popular reason is they can design and build it by themself and DIY everything they like, just take 2 days with 2 people can build it. Just two days to build a house? You will have an idea, if DIY a shower room in it, it will take less time to do it. Yes, your idea is amazing but if you have the right way to do it. How to do it? Let explain for you.

How to DIY install a frameless shower door room?

First of all you should Prepare something before installing.

Preparing:

Install tools

order the glass solid/side panel with 4 glass clips, two hinges doors with open both ways, order shower door hardware to match plumbing finishes, nickle finish, stain finish or chrome finish.

First step:

Measure the size shower screen place

Make sure your walls are nice and flat with the level, lines up drewing plumb line and straight lines to make everything is in the same plane

Installing of the shower room processing.

1. Install the side panel first and dry-fit,moving on to the door is to make sure we have them both lined up have the doors and panels as far towards the outside of the showers, get them that way you have a little more room and it will a really nice shower

2. Install the solid panel. Mark position and drilling for the base and wall, put the screw side of the clip in the base and wall, install the solid panel and than fix it with the finish side of the clip and screw, don’t forget to put the glass rubber shims

3. Install the door panel:  Install the door handle to the door first, fasten the bottom hinge to the wall first and then the top hinge, install the door panel, make sure put plastic gasket in the middle between the hinge and the glass to protect the glass.

4. In stall the silicon shower seal according the different door type.
   If you like to know more detail about install the glass clip and shower door hing to the door, I will shower you in the next article.